Step 1:Create a Private Mirror Image

To set up Secure Hidden Mirror Image (Semi) on your Windows machine using the Hide.me VPN client, follow these organized steps:

1. Open the command prompt and type set mirror to create a private network on your machine. Name it, for example, "MyNetwork".

Step 2: Configure the Hide.me Client to Redirect to the Mirror Image

2. Use the set mirror image command to set up the private mirror image on your local network. Ensure the port is 88 or 8443.

   set mirror image 88

Step 3: Connect to the Target Host

3. Connect using the connect command in the command prompt. Use a static IP address from your network.

   connect 127...1 8 88

Step 4: Configure Your Network to Allow Traffic from the Mirror Image

4. Use config net allow to enable traffic from the mirror image.

   config net allow

Step 5: Test the Connection

5. Open the command prompt and type ipconfig to check the connection status. Verify that the connection to the mirror image is working and secure.

Troubleshooting

• Check Mirror Image Status: If the mirror image isn't visible, re-run set mirror image and config net allow.
• Adjust Port Number: If needed, change the port number to 88 or 8443.
• Enable Mirror Image Feature: In the client settings, enable the Mirror Image feature.

Additional Considerations

• Security: Semi offers enhanced security by bypassing public Wi-Fi, making it more secure than traditional mirrors.
• Disabling Semi: Use config net disable mirror to disable the feature if required.

By following these steps, you should successfully set up Semi on your Windows machine, providing a secure and reliable VPN experience.